Startseite
poe adapter
TP-LINK 802.3af Gigabit PoE Injector, Convert Non-PoE to PoE Adapter

TP-LINK 802.3af Gigabit PoE Injector, Convert Non-PoE to PoE Adapter

4.9 (700) · € 22.50 · Auf Lager

PoE Injector Up to 30W Power Supply, Gigabit PoE Adapter for IP Cameras and VoIP Phones Network Distance Up to 328 ft. PoE Power Supply IEEE 802.3af

【Convert Non-PoE to PoE】PoE injector 30W/52V can Convert Non-PoE to PoE ，you can easily have PoE enabled With no need to replace your existing non-PoE

Gigabit PoE+ Injector 30W 52V, Passive Power Over Ethernet PoE Adapter, Single Port PoE Power Injector for IP Camera Wireless/Wireless Access Point

What is a PoE Injector?

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters such as TP-LINKs TL-POE10R or other equivalent product to expand your network to where there are no power line or outlet where you wish to fix device such as AP IP Camera or IP Phone etc. IEEE 802.3af compliant. Delivers power up to 100 meters. Auto-determine the necessary power requirements.

TP-Link TL-POE150S PoE Injector

TP-Link TL-PoE160S 802.3at/af Gigabit PoE Injector

TP-LINK TL-POE150S

The Intellinet Network Solutions Power over Ethernet injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

Intellinet 524179 1-Port PoE Injector

The TP-DCDC-1224 offered by Tycon Power is a low cost and high reliability solution for those requiring 24VDC Power over Ethernet voltage from a 12 or 24V battery system. They have an integrated POE injector to apply the 24VDC to the CAT5/6 Ethernet cable. The output is regulated 24VDC from an input voltage between 9VDC and 36VDC. They have one common (-) and two (+) inputs for connecting 2 power sources, such as a primary with a backup power source.

Tycon Systems 9-36VDC in 24V 24W Passive PoE Out DC to DC Converter and PoE Injector TP-DCDC-1224

Gigabit Passive PoE Injector 24W POE Adapter 36-72V DC Input 24V

Convert and split PoE+ or Power over Ethernet into 12 volt DC power up to 25 watts and Gigabit data using this PoE+ splitter. Power 12 volt Single Board Computers, Tablets, and IEEE 802.3at PTZ Cameras with PoE at 12 volts. Use this gigabit splitter device with your existing 802.3at PoE+ switch or 48v PoE injector to power 12 volt non-PoE devices. Try it with our 48v 60w injector to provide 25 watts of continuous 12 volt power to any device.

PoE Texas PoE+ to 12V 25W Splitter/Converter - Converts and Splits 802.3at Power and Data to 12V DC and Gigabit Data On Ethernet

PoE Injector Up to 30w Power Supply, Gigabit PoE

The Intellinet Network Solutions Gigabit PoE+ Media Converter offers simplified migration from copper-based Ethernet to Fiber Ethernet while providing power to a compatible device at up to 30 watts. The device creates the easy expansion of existing networks with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before - only now it can support both copper and fiber mediums. Expand the Size of an Existing Network.