The POE-AT1 is single port 802.3at PoE injector capable of powering power over Ethernet devices up to 30 Watts over Cat-5 cable.
Ubiquiti 802.3at PoE Injector U-POE-at
95W Gigabit Single Port 1000mbps PoE++ Switch Midspan PoE Injector, IE
Ubiquiti PoE Injector, 802.3AT
Deliver power and data to four Power over Ethernet devices using this wall-mountable PoE+ midspan hub. This Gigabit midspan PoE+ injector is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model. It supplies up to 30 Watts output to each port, so you can easily power and access up to four high-power PoE-compliant devices - such as IP cameras - using standard Ethernet cable.
StarTech.com 4 Port Gigabit Midspan - PoE+ Injector (POEINJ4G)
PLANET POE-161 IEEE 802.3at Gigabit High Power Over Ethernet Injector (10/100/1000 Mbps, Mid-Span, 30 Watts)
IGP-0102 Industrial Gigabit POE Injector, 802.3at PoE+, 36 – LevelOne
INJ-GE-60R Gigabit Ethernet PoE 802.3af, 802.3at and 802.3bt compatibl – Fosco Connect
HORACO POE Injector 30W 2.5Gbps/Gigabit with IEEE 802.3at/af Plug&Play PoE Injector Adapter for IP Camera,Wireless Router AP - AliExpress
The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.
30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE
1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds. Auto-sensing technology delivers up to
Gigabit Ultra PoE Injector, IEEE 802.3BT/ at/af Compliant, Non-PoE to PoE Adapter Supplies up to 60W (PoE++) Wall-Mount Distance Up to 328 ft
Dahua PFT1200 High PoE Midspan
POE-AT1 802.3at PoE Injector, PoE Midspan, Gigabit Ethernet, 30 Watts
The Edimax GP-101IT is a Power over Ethernet injector that not only delivers a cost-effective solution for power distribution, but also provides a seamless way of deployment on the existing LAN infrastructure. With the use of power injectors, DC power of up to 30W and the data that comes from a non-PoE switch or router are merged together and then transmitted to the IEEE 802.3at/af compliant products such as PoE dome cameras through the Ethernet cabling.
Edimax GP-101IT IEEE 802.3at Gigabit PoE+ Injector
POE-163 IEEE 802.3at Gigabit High PoE Injector (30W, Mid-Span, Integrated) - Planet Technology USA
The TP-POE-2456GD is a unique Power over Ethernet adapter which converts a 24VDC passive PoE input to an 802.3af/at 56VDC PoE output. The only connections required are CAT5/6 cables. The IEEE 802.3af/at compliant PoE output is capable of up to 35W power output.
Tycon Systems TP-POE-2456GD 24V Passive PoE in, 56V 35W Gigabit 802.3at PoE Output Converter
