Startseite
linovision poe injector
Linovision Mini Passive 2-Port PoE Extender / PoE Repeater to Transmit Data and Power over Cat5/6 Network Cable

Linovision Mini Passive 2-Port PoE Extender / PoE Repeater to Transmit Data and Power over Cat5/6 Network Cable

4.6 (555) · € 16.50 · Auf Lager

Power over Ethernet (PoE) enables the delivery of ethernet data and power simultaneously over a single Cat5 or Cat6 network cable. POE technology makes the network devices deployment much easier and eliminate the requirement of electrical regulations. Therefore, more and more devices are becoming IP based and PoE Powered.

2-PORT POE SPLITTER - Designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable.
UP TO 300m POE + DATA EXTENTION - Extra 100m POE+Data transmission will be extended with one POE Extender. And it supports two levels cascade deployment, therefore total 300m POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
COMPLIANT TO IEEE802.3AF/AT STANDARD - Works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE outputs supply power to standard POE devices, like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease.
EASY TO CONFIGURE IP CAMERA ON SITE - By connecting it to an existing PoE cable, installers can use laptop or CCTV Tester to easily adjust camera angle and configure IP.
PLUG-N-PLAY INSTALLATION - No configuration or setup is required. With compact dimension, enough to fit it many junction boxes or outdoor waterproof enclosures.

Application

POE passthrough switch, poe splitter, run one network cable to connect two POE or non-POE devices.
Extend the power+data transmission distance, up to 300m totally.

Up to 660ft PoE transmission, or max 1000ft with cascade deployment, 2 Port PoE extender, running one ethernet cable to connect to 2 IP devices, IEEE

Mini 2-Port PoE Extender to Split One PoE cable for Two PoE devices 5pack

Gigabit 2 Port Industrial POE Extender, POE Repeater, PoE Amplifier, PoE Booster 1 in 2 Out

POE Extender 1 T0 2 Port 10/100M Multilevel IP POE Extender 300 Meters Cat5 /5E/6 Ethernet Transmit Data IEEE802.3af for IP Cams - AliExpress

PoE to USB-C - Split IEEE802.3af POE to 10/100Mbps Data and 5V 2.4A USB-C Power outputs., IEEE 802.3af INPUT - IEEE 802.3af PoE Input, working with

POE Splitter to USB-C Power and Ethernet Data (2 pack)

ThePoEstore 5-Pack PoE Extender PoE Repeater,1 Port Supported，10/100Mbps，15.4W Comply with IEEE 802.3af，Power Over Ethernet Switch for Security PoE Camera Over Cat5/Cat6 : Electronics